[Savage40] No dri with CVS Build?

[Alex Deucher]

--- Joel Cornuz <jcornuz at worldonline.ch> wrote:

> Hi there,
> 
> First of all, THANKS to Felix and Alex for your good work on the
> Savage 
> driver :-)
> 
> Now on to my problems :-/
> 
> I tried to build the driver for my TwisterK. Xorg, Mesa and drm build
> fine. 
> I need to echo "disable=XX" > /proc/mtrr a couple of time before
> modprobe -k 
> savage. Dmesg tells me:
>     [drm] Initialized drm 1.0.0 20040925
>     ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ
> 11
>     mtrr: base(0x92000000) is not aligned on a size(0x5000000)
> boundary
>     [drm] Initialized savage 2.1.2 20050110 on minor 0: S3 Inc.
> VT8636A 
> [ProSavage KN133] AGP4X VGA Controller (TwisterK)
> 
> which is fine, as far as I can tell. Then I startx but glxinfo
> reports no 
> dri enabled !? Am I missing something obvious?
> Here is an extract from Xorg.log - looks fine but it doesn't report
> loading 
> savage_dri ??
> 
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 6.8.1.99, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No 
> symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No 
> symbols found
> Skipping
> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No 
> symbols found
> (II) Module GLcore: vendor="X.Org Foundation"
> compiled for 6.8.1.99, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 6.8.1.99, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="X.Org Foundation"
> compiled for 6.8.1.99, module version = 1.0.0
> ABI class: X.Org Server Extension, version 0.2
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "savage"
> (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
> (II) Module savage: vendor="X.Org Foundation"
> compiled for 6.8.1.99, module version = 2.0.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 0.7
> 
> Well, if you have an idea, I would appreciate...
> 
> Thanks
> 
> Joel 
> 

does your xorg log report that direct rendering is enabled?  If so it's
probably a problem with libGL.  Take a look at this page for more
information on debugging DRI problems:
http://dri.freedesktop.org/wiki/DriTroubleshooting

Alex



		
__________________________________ 
Do you Yahoo!? 
Read only the mail you want - Yahoo! Mail SpamGuard. 
http://promotions.yahoo.com/new_mail