[Savage40] No dri with CVS Build?

[Alex Deucher]

--- Joel Cornuz <jcornuz at worldonline.ch> wrote:

> OK, thanks for the pointer - and thanks for your availability...
> 
> As it appears, I have stuff like
> 
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) SAVAGE(0): initializing int10
> (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
> (II) SAVAGE(0): VESA BIOS detected
> (II) SAVAGE(0): VESA VBE Version 2.0
> (II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
> (II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS
> (II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
> (II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
> (II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
> (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
> 
> In my xorg.log. so it looks like the savage_dri module is not used. 
> I guess I need to recheck my host.def and redo a X build (yuck).
> 

Look for lines in your log that start with [drm] or [agp].  If you
rebuild from source, make sure you use xorg/mesa/drm from cvs.  xorg
6.8.x does not have 3d support for savages.  This guide should get you
going:
http://dri.freedesktop.org/wiki/Building


Alex

> Cheers.
> 
> Joel
> ----- Original Message ----- 
> From: "Alex Deucher" <agd5f at yahoo.com>
> To: "Joel Cornuz" <jcornuz at worldonline.ch>; <savage40 at probo.com>
> Sent: Thursday, January 20, 2005 7:08 PM
> Subject: Re: [Savage40] No dri with CVS Build?
> 
> 
> > 
> > --- Joel Cornuz <jcornuz at worldonline.ch> wrote:
> > 
> >> Hi there,
> >> 
> >> First of all, THANKS to Felix and Alex for your good work on the
> >> Savage 
> >> driver :-)
> >> 
> >> Now on to my problems :-/
> >> 
> >> I tried to build the driver for my TwisterK. Xorg, Mesa and drm
> build
> >> fine. 
> >> I need to echo "disable=XX" > /proc/mtrr a couple of time before
> >> modprobe -k 
> >> savage. Dmesg tells me:
> >>     [drm] Initialized drm 1.0.0 20040925
> >>     ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) ->
> IRQ
> >> 11
> >>     mtrr: base(0x92000000) is not aligned on a size(0x5000000)
> >> boundary
> >>     [drm] Initialized savage 2.1.2 20050110 on minor 0: S3 Inc.
> >> VT8636A 
> >> [ProSavage KN133] AGP4X VGA Controller (TwisterK)
> >> 
> >> which is fine, as far as I can tell. Then I startx but glxinfo
> >> reports no 
> >> dri enabled !? Am I missing something obvious?
> >> Here is an extract from Xorg.log - looks fine but it doesn't
> report
> >> loading 
> >> savage_dri ??
> >> 
> >> (II) LoadModule: "glx"
> >> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> >> (II) Module glx: vendor="X.Org Foundation"
> >> compiled for 6.8.1.99, module version = 1.0.0
> >> ABI class: X.Org Server Extension, version 0.2
> >> (II) Loading sub module "GLcore"
> >> (II) LoadModule: "GLcore"
> >> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> >> Skipping
> >> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No
> 
> >> symbols found
> >> Skipping
> >> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No
> 
> >> symbols found
> >> Skipping
> >> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":
> No 
> >> symbols found
> >> (II) Module GLcore: vendor="X.Org Foundation"
> >> compiled for 6.8.1.99, module version = 1.0.0
> >> ABI class: X.Org Server Extension, version 0.2
> >> (II) Loading extension GLX
> >> (II) LoadModule: "dri"
> >> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> >> (II) Module dri: vendor="X.Org Foundation"
> >> compiled for 6.8.1.99, module version = 1.0.0
> >> ABI class: X.Org Server Extension, version 0.2
> >> (II) Loading sub module "drm"
> >> (II) LoadModule: "drm"
> >> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> >> (II) Module drm: vendor="X.Org Foundation"
> >> compiled for 6.8.1.99, module version = 1.0.0
> >> ABI class: X.Org Server Extension, version 0.2
> >> (II) Loading extension XFree86-DRI
> >> (II) LoadModule: "savage"
> >> (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
> >> (II) Module savage: vendor="X.Org Foundation"
> >> compiled for 6.8.1.99, module version = 2.0.0
> >> Module class: X.Org Video Driver
> >> ABI class: X.Org Video Driver, version 0.7
> >> 
> >> Well, if you have an idea, I would appreciate...
> >> 
> >> Thanks
> >> 
> >> Joel 
> >> 
> > 
> > does your xorg log report that direct rendering is enabled?  If so
> it's
> > probably a problem with libGL.  Take a look at this page for more
> > information on debugging DRI problems:
> > http://dri.freedesktop.org/wiki/DriTroubleshooting
> > 
> > Alex
> > 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com