[Savage40] No dri with CVS Build?

[Joel Cornuz]

OK, thanks for the pointer - and thanks for your availability...

As it appears, I have stuff like

(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Twister BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1

In my xorg.log. so it looks like the savage_dri module is not used. 
I guess I need to recheck my host.def and redo a X build (yuck).

Cheers.

Joel
----- Original Message ----- 
From: "Alex Deucher" <agd5f at yahoo.com>
To: "Joel Cornuz" <jcornuz at worldonline.ch>; <savage40 at probo.com>
Sent: Thursday, January 20, 2005 7:08 PM
Subject: Re: [Savage40] No dri with CVS Build?


> 
> --- Joel Cornuz <jcornuz at worldonline.ch> wrote:
> 
>> Hi there,
>> 
>> First of all, THANKS to Felix and Alex for your good work on the
>> Savage 
>> driver :-)
>> 
>> Now on to my problems :-/
>> 
>> I tried to build the driver for my TwisterK. Xorg, Mesa and drm build
>> fine. 
>> I need to echo "disable=XX" > /proc/mtrr a couple of time before
>> modprobe -k 
>> savage. Dmesg tells me:
>>     [drm] Initialized drm 1.0.0 20040925
>>     ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ
>> 11
>>     mtrr: base(0x92000000) is not aligned on a size(0x5000000)
>> boundary
>>     [drm] Initialized savage 2.1.2 20050110 on minor 0: S3 Inc.
>> VT8636A 
>> [ProSavage KN133] AGP4X VGA Controller (TwisterK)
>> 
>> which is fine, as far as I can tell. Then I startx but glxinfo
>> reports no 
>> dri enabled !? Am I missing something obvious?
>> Here is an extract from Xorg.log - looks fine but it doesn't report
>> loading 
>> savage_dri ??
>> 
>> (II) LoadModule: "glx"
>> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
>> (II) Module glx: vendor="X.Org Foundation"
>> compiled for 6.8.1.99, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.2
>> (II) Loading sub module "GLcore"
>> (II) LoadModule: "GLcore"
>> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
>> Skipping
>> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No 
>> symbols found
>> Skipping
>> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No 
>> symbols found
>> Skipping
>> "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No 
>> symbols found
>> (II) Module GLcore: vendor="X.Org Foundation"
>> compiled for 6.8.1.99, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.2
>> (II) Loading extension GLX
>> (II) LoadModule: "dri"
>> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
>> (II) Module dri: vendor="X.Org Foundation"
>> compiled for 6.8.1.99, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.2
>> (II) Loading sub module "drm"
>> (II) LoadModule: "drm"
>> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
>> (II) Module drm: vendor="X.Org Foundation"
>> compiled for 6.8.1.99, module version = 1.0.0
>> ABI class: X.Org Server Extension, version 0.2
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "savage"
>> (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
>> (II) Module savage: vendor="X.Org Foundation"
>> compiled for 6.8.1.99, module version = 2.0.0
>> Module class: X.Org Video Driver
>> ABI class: X.Org Video Driver, version 0.7
>> 
>> Well, if you have an idea, I would appreciate...
>> 
>> Thanks
>> 
>> Joel 
>> 
> 
> does your xorg log report that direct rendering is enabled?  If so it's
> probably a problem with libGL.  Take a look at this page for more
> information on debugging DRI problems:
> http://dri.freedesktop.org/wiki/DriTroubleshooting
> 
> Alex
> 
> 
> 
> 
> __________________________________ 
> Do you Yahoo!? 
> Read only the mail you want - Yahoo! Mail SpamGuard. 
> http://promotions.yahoo.com/new_mail