[Savage40] kernel module version mismatch?
Luis
luis at riseup.net
Mon Jan 31 02:31:56 PST 2005
Hi all,
I can't get DRI to work on my machine and I really don't know why.
I have an integrated VIA ProSavage chip, on a ASUS P4V533-MX
motherboard, and right now I'm running Slackware 10.0 here, using kernel
2.4.29. This weekend I decided to upgrade X to 6.8.1, using the
Slackware-current packages, and after some trouble I got X to work.
Trying to get DRI enabled I followed the instructions from the DRI
Building page, downloading the CVS trees for X.org, Mesa and DRM, and
compiling and installing all three of them without much trouble. But
now, whenever I start X I get this annoying error, which I have no idea
how to solve:
(EE) SAVAGE(0): [dri] SAVAGEDRIScreenInit failed because of a version
mismatch.
[dri] savage.o kernel module version is 1.0.0 but version 2.0.x is needed.
[dri] Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(EE) SAVAGE(0): Direct rendering disabled
What I don't understand is, how can the savage.o kernel module be an old
version (v1.0.0) if I just compiled DRM and copied the DRM modules into
the kernel tree? I hope I'm not missing something obvious here. Can
anyone point me to a possible solution to this problem?
I'm absolutely sure I didn't miss any step of the Building instructions
and I also tried to find a solution on DriTroubleshooting before
deciding to write to this list.
The X.org log is attached, along with the output of 'dmesg' and 'lspci
-vv'. Let me know if there's any other information I can provide.
Thank you.
--
Luis
-------------- next part --------------
Linux version 2.4.29 (root at midas) (gcc version 3.3.4) #6 Thu Jan 20 16:30:37 PST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000df30000 (usable)
BIOS-e820: 000000000df30000 - 000000000df40000 (ACPI data)
BIOS-e820: 000000000df40000 - 000000000dff0000 (ACPI NVS)
BIOS-e820: 000000000dff0000 - 000000000e000000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
223MB LOWMEM available.
On node 0 totalpages: 57136
zone(0): 4096 pages.
zone(1): 53040 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2003.462 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3997.69 BogoMIPS
Memory: 222852k/228544k available (1831k kernel code, 5304k reserved, 607k data, 120k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd0000000, mapped to 0xce80d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=40
vesafb: protected mode interface info at c000:7f24
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST340014A, ATA DISK drive
blk: queue c03ad460, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2334.400 MB/sec
32regs : 1508.000 MB/sec
pIII_sse : 2569.600 MB/sec
pII_mmx : 2349.200 MB/sec
p5_mmx : 2308.800 MB/sec
raid5: using function: pIII_sse (2569.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 19973
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 19973
FAT: bogus logical sector size 19973
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 377516k swap-space (priority -1)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 176M
agpgart: Detected Via Apollo P4M266 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
uhci.c: USB UHCI at I/O 0xec00, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xe080, IRQ 3
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 5, pci mem ceab4800
usb.c: new USB bus registered, assigned bus number 4
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
PCI: Setting latency timer of device 00:11.5 to 64
via-rhine.c:v1.10-LK1.1.19 July-12-2003 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xe800, 00:0c:6e:d0:3f:5f, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4521B Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
hub.c: new USB device 00:10.0-1, assigned address 2
printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7304
i2c-core.o: i2c core module version 2.9.0 (20041228)
i2c-viapro.o version 2.9.0 (20041228)
i2c-isa.o version 2.9.0 (20041228)
i2c-proc.o version 2.9.0 (20041228)
eeprom.o version 2.9.0 (20041228)
hub.c: new USB device 00:10.0-2, assigned address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb3:3.0
w83627hf.o version 2.9.0 (20041228)
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (1785 buckets, 14280 max) - 288 bytes per conntrack
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
lp: driver loaded but no devices found
PCI: Unable to reserve mem region #2:8000000 at d0000000 for device 01:00.0
PCI: Unable to reserve mem region #2:8000000 at d0000000 for device 01:00.0
mtrr: base(0xd2000000) is not aligned on a size(0x5000000) boundary
[drm] Initialized savage 1.0.0 20011023 on minor 0: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
[drm] Used old pci detect: framebuffer loaded
[drm:savage_unlock] *ERROR* Process 612 using kernel context 0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=14293 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=14452 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=2
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=22850 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=23953 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=2
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=32149 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=35695 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=39797 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=39962 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=2
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=46525 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=46691 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=2
Class A address: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=10.10.192.3 DST=150.164.233.50 LEN=363 TOS=0x00 PREC=0x00 TTL=126 ID=64417 PROTO=UDP SPT=67 DPT=68 LEN=343
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=47691 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=0
ICMP-request: IN=eth0 OUT= MAC=00:0c:6e:d0:3f:5f:00:03:fe:e3:0c:a8:08:00 SRC=150.164.64.2 DST=150.164.233.50 LEN=1500 TOS=0x00 PREC=0x00 TTL=249 ID=47979 DF PROTO=ICMP TYPE=8 CODE=0 ID=0 SEQ=2
-------------- next part --------------
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 807b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfd00000-dfefffff
Prefetchable memory behind bridge: cfc00000-dfbfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Communication controller: Lucent Microelectronics: Unknown device 048c (rev 02)
Subsystem: Lucent Microelectronics: Unknown device 044c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63000ns min, 3500ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at dffff400 (32-bit, non-prefetchable) [size=256]
Region 1: I/O ports at dc00 [size=8]
Region 2: I/O ports at d800 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at e080 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 20
Interrupt: pin D routed to IRQ 5
Region 0: Memory at dffff800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 80a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Asustek Computer, Inc.: Unknown device 810f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: Asustek Computer, Inc.: Unknown device 80ff
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at dffffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 807b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe80000 (32-bit, non-prefetchable) [size=512K]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at dfe70000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
More information about the Savage40
mailing list