[Savage40] Re: xgamma + SAVAGE == nothing

[Joseph Heled]

Hi again Tim,

I had come full circle and not downgraded to bitdepth 16 in order to
get DRI working. My card does not have enough ram to support 24 bpp
and DRI. However the performance is still quite poor, about 430
frames/sec for the glxgears.

I am running an ububtu athlon 2.6.10 kernel. I installed the latest
driver from http://dri.freedesktop.org/. Here is part of the X log.
Perhaps you could tell me if it indicated a problem or not????

Thanks, Joseph


II) SAVAGE(0): map aperture:0xb1ce9000
(II) SAVAGE(0): 11382 kB of Videoram needed for 3D; 16384 kB of
Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] loaded kernel module for "savage" driver
(II) SAVAGE(0): [drm] DRM interface version 1.2
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xefc2a000
(II) SAVAGE(0): [drm] mapped SAREA 0xefc2a000 to 0xb1ce7000
(II) SAVAGE(0): [drm] framebuffer handle = 0xd0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3116; Card 0x5333/0x8d04]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xe0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xe0100000
(II) SAVAGE(0): [drm] aperture handle = 0xd2000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x2910d000
(II) SAVAGE(0): [drm] Status page mapped at 0xb1ce6000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled