[Savage40] DRI enabled or not ?

[Alex Deucher]

--- Alban Taraire <alban.taraire at netk5.com> wrote:

> Hi all,
> 
> after trying since long time to get DRI work on my S3TwisterK based
> laptop, 
> i'm coming close to the goal, particularly by reading this list.
> 
> Now  i have practically succeeded, but i still don't get the holy
> 'Direct 
> rendering = Yes' in glxinfo, and i don't understand what's wrong.
> 
> I got the lastest snapshot from freedesktop (20050718), it compiled
> ok, both 
> common and savage. 
> 
> My /var/log/Xorg.0.log reads :
> 
> [...]
> 
> (II) SAVAGE(0): 9348 kB of Videoram needed for 3D; 32768 kB of
> Videoram 
> available
> (II) SAVAGE(0): Sufficient Videoram available for 3D
> (II) SAVAGE(0): [drm] bpp: 32 depth: 24
> (II) SAVAGE(0): [drm] Sarea 2200+284: 2484
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (Unknown error 999)
> drmOpenDevice: open result is -1, (Unknown error 999)
> drmOpenDevice: Open failed
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is -1, (Unknown error 999)
> drmOpenDevice: open result is -1, (Unknown error 999)
> drmOpenDevice: Open failed
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 8, (OK)
> drmOpenByBusid: drmOpenMinor returns 8
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (II) SAVAGE(0): [drm] loaded kernel module for "savage" driver
> (II) SAVAGE(0): [drm] DRM interface version 1.2
> (II) SAVAGE(0): [drm] created "savage" driver at busid
> "pci:0000:01:00.0"
> (II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xdec43000
> (II) SAVAGE(0): [drm] mapped SAREA 0xdec43000 to 0xb0c45000
> (II) SAVAGE(0): [drm] framebuffer handle = 0xf0000000
> (II) SAVAGE(0): [drm] added 1 reserved context for kernel
> (II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0305; Card
> 0x5333/0x8d02]
> (II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
> (II) SAVAGE(0): [agp] command DMA handle = 0xec000000
> (II) SAVAGE(0): [agp] agpTextures handle = 0xec100000
> (II) SAVAGE(0): [drm] aperture handle = 0xf2000000
> (II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
> (II) SAVAGE(0): [drm] Status handle = 0x0eb12000
> (II) SAVAGE(0): [drm] Status page mapped at 0xb0c44000
> (II) SAVAGE(0): [dri] visual configs initialized
> (**) SAVAGE(0): DRI is enabled
> 

<snip>

> So i guess it should be ok anyway.
> 
> Well, Xorg tells me everything's fine and DRI is enabled and running,
> and 
> glxinfo still can't use it...
> 
> Any idea anyone ?

I suspect a library issue.  try running:
LIBGL_DEBUG=verbose glxinfo
and post the output.

Alex

> 
> Thanks,
> 
> Alban



__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com