[Savage40] SuperSavage/IXC 64 issues

[Pascal Sclafer]

Hi,

I have the same problem which is mentioned in your post.
The glxgears window stay black after I upgraded my X.org to the version
7.1, and Mesa 6.5.

I use a Slackware 10.2 with Xorg compiled from the sources.

In Xorg 7.0 with Mesa 6.4.1, glxgears was running fine, but not in Xorg
7.1. I tried to downgrade Mesa to 6.4.1, but I had always the same
problem. Thus, I think that the problem comes from Xorg 7.1

When I run glxgears with Xorg 7.1, I have the following message in the
terminal:
libGL warning: 3D driver claims to not support visual 0x4b



My laptop is an ACER Aspire 1310. I send an extract of lspci:

01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8
KM266/KL266] (prog-if 00 [VGA])
        Subsystem: Acer Incorporated [ALI]: Unknown device 0030
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 128 (1000ns min, 63750ns max), cache line size 04
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at e0080000 (32-bit, non-prefetchable)
[size=512K]
        Region 1: Memory at a8000000 (32-bit, prefetchable) [size=128M]
        Expansion ROM at a0000000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [80] AGP version 2.0
                Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x4
                Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit-
FW- Rate=x4

I hope theses informations will be helpfull.
I can give more informations and test patches if a workaound is found.

Pascal

P.S: Sorry for my bad english





Le mardi 08 août 2006 à 11:01 +0200, Joachim Frieben a écrit :
> Hi Alex,
> 
> in my opinion, the most urgent issue is that reported in
> 
>   https://bugs.freedesktop.org/show_bug.cgi?id=6357
> 
> which has been observed independently by different users. The black
> "glxgears" window appeared only in "Xorg" release 7.1 whereas it was absent
> in release 7.0. It would be interesting to know if you can reproduce this
> issue on your notebook.
> I strongly conjecture that the other cited bugs reported at "Red Hat
> Bugzilla" depend on this issue.
> 
>   -J
> 
> >
> > I still have a savage notebook and I work on the driver as I have time.
> > I haven't had time to track down the recently reported problems with
> > 3D on newer versions of Xorg.  Unforunately, I can't repoduce all the
> > problems.  In the meantime, if anyone else is able to debug it and
> > produce a patch, I'll be happy to review it and apply it upstream.
> >
> > Alex
> >
> 
> 
> _______________________________________________
> Savage40 mailing list
> Savage40 at probo.com
> http://www.probo.com/mailman/listinfo/savage40