[Savage40] Thinkpad T23 and external monitor 1680x1050

[Alex Deucher]

--- Gianluca Interlandi <gianluca at u.washington.edu> wrote:

> It works!
> 
> I have only tested it with an old 19" CRT monitor though. But I was
> able 
> to set 1680x1050 by using the option "UseBios" "FALSE". I have a
> safety 
> question though. What happens if I accidentally switch to the laptop
> LCD 
> (by pressing Fn+F7) while the X11 is running at 1680x1050? Am I going
> to 
> damage my laptop LCD? Would "CrtOnly" "TRUE" prevent that?

I'm not sure what the bios actually does when you press fn-f7.  It may
set the mode of you panel and toggle the output routing bits or it may
just toggle the output routing bits.  None of the driver options affect
the bios as it bangs the hardware directly.

Alex


> 
> For those who are interested here is a short description of what I
> have 
> done. I first shut down the X11 server (runlevel 3) and pressed Fn+F7
> to 
> switch to the external monitor. I started sax2 (I use SUSE linux) and
> 
> selected 1680x1050. I chose to save the configuration (test fell back
> to 
> 1400x1050). I manually edited xorg.cong and added
> 
> Option       "UseBIOS" "FALSE"
> 
> to the Device section. I started the X server and it was really
> running at 
> 1680x1050. However, since it was an old 19" 3:4 monitor the desktop
> was 
> squeezed in the horizontal direction. But this should be enough to
> tell 
> that the S3 Savage card is able to bring that resolution.
> Furthermore, 
> 1600x1200 worked out of the box without any manual editing. I will
> post 
> another message after testing it with a 20" widescreen LCD monitor.
> 
> Best,
> 
>    Gianluca
> 
> On Wed, 18 Jul 2007, Alex Deucher wrote:
> 
> > 
> > --- Gianluca Interlandi <gianluca at u.washington.edu> wrote:
> > 
> > > > I've never used sax so I don't really know how it works.  Just
> add:
> > > > Option "UseBIOS" "FALSE"
> > > > to the device section of your xorg.conf and restart X.
> > > 
> > > ok, but how do I change the resolution from 1400x1050 to
> 1680x1050
> > > after I 
> > > have restarted X?
> > 
> > 
> > Adjust the monitor section to reflect the hsync and vrefresh of
> your
> > monitor and then add 1680x1050 to the modes line in the screen
> section
> > of your config.  You may have to add a custom modeline if the
> monitor
> > requires special timings.
> > 
> > Alex
> > 
> > > 
> > > G
> > > 
> > > On Wed, 18 Jul 2007, Alex Deucher wrote:
> > > 
> > > > --- Gianluca Interlandi <gianluca at u.washington.edu> wrote:
> > > > 
> > > > > Sorry, I need to ask another question. I use sax2 (SuSE) to
> setup
> > > the
> > > > > X11 
> > > > > server. If I add "UseBIOS" FALSE (in the Section "Device"?)
> how
> > > do I
> > > > > make 
> > > > > sax2 consider this option? Or is there a better way of doing
> it?
> > > > > 
> > > > 
> > > > I've never used sax so I don't really know how it works.  Just
> add:
> > > > Option "UseBIOS" "FALSE"
> > > > to the device section of your xorg.conf and restart X.
> > > > 
> > > > Alex
> > > > 
> > > > > Thanks a lot,
> > > > > 
> > > > >            Gianluca
> > > > > 
> > > > > On Wed, 18 Jul 2007, Alex Deucher wrote:
> > > > > 
> > > > > > 
> > > > > > --- Gianluca Interlandi <gianluca at u.washington.edu> wrote:
> > > > > > 
> > > > > > > > There is some code to manually program the mode ...
> > > > > > > 
> > > > > > > Do you mean xmode? Or is there some other code?
> > > > > > > 
> > > > > > 
> > > > > > There's code in the driver.  Set option "UseBIOS" to FALSE
> in
> > > your
> > > > > > config.  you'll probably have to mess you with you monitor
> > > settings
> > > > > as
> > > > > > well.
> > > > > > 
> > > > > > Alex
> > > > > > 
> > > > > > 
> > > > > > 
> > > > > >        
> > > > > >
> > > > >
> > > >
> > >
> >
>
____________________________________________________________________________________
> > > > > > Take the Internet to Go: Yahoo!Go puts the Internet in your
> > > pocket:
> > > > > mail, news, photos & more. 
> > > > > > http://mobile.yahoo.com/go?refer=1GNXIC
> > > > > > 
> > > > > 
> > > > > -----------------------------------------------------
> > > > > Dr. Gianluca Interlandi gianluca at u.washington.edu
> > > > >                     +1 (206) 685 4435
> > > > >                     +1 (206) 714 4303
> > > > >                     http://biocroma.unizh.ch/gianluca/
> > > > > 
> > > > > Postdoc at the Department of Bioengineering
> > > > > at the University of Washington, Seattle WA U.S.A.
> > > > > -----------------------------------------------------
> > > > > 
> > > > 
> > > > 
> > > > 
> > > >        
> > > >
> > >
> >
>
____________________________________________________________________________________
> > > > Be a better Heartthrob. Get better relationship answers from
> > > someone who knows. Yahoo! Answers - Check it out. 
> > > > http://answers.yahoo.com/dir/?link=list&sid=396545433
> > > > 
> > > 
> > > -----------------------------------------------------
> > > Dr. Gianluca Interlandi gianluca at u.washington.edu
> > >                     +1 (206) 685 4435
> > >                     +1 (206) 714 4303
> > >                     http://biocroma.unizh.ch/gianluca/
> > > 
> > > Postdoc at the Department of Bioengineering
> > > at the University of Washington, Seattle WA U.S.A.
> > > -----------------------------------------------------
> > > 
> > 
> > 
> > 
> >      
>
____________________________________________________________________________________
> > Shape Yahoo! in your own image.  Join our Network Research Panel
> today!   http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 
> > 
> > 
> > 
> 
> -----------------------------------------------------
> Dr. Gianluca Interlandi gianluca at u.washington.edu
>                     +1 (206) 685 4435
>                     +1 (206) 714 4303
>                     http://biocroma.unizh.ch/gianluca/
> 
> Postdoc at the Department of Bioengineering
> at the University of Washington, Seattle WA U.S.A.
> -----------------------------------------------------
> 



       
____________________________________________________________________________________
Get the free Yahoo! toolbar and rest assured with the added security of spyware protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php